137
TECHNICAL
SPECIFICATIONS
G
5.4 System Environmental Requirements
Operating
Ambient Operating Temperature: + 50°F to 104°F (+ 10°C to + 40°C)
Relative Humidity: 30% to 75%
Atmospheric Pressure: 700 hPa to 1060 hPa
Transport and Storage:
Ambient Temperature: - 40°F to 158°F (- 40°C to + 70°C)
Relative Humidity: 10% to 100% including condensation
Atmospheric Pressure: 500 hPa to 1060 hPa
The Hall Advantage, E9000, and PowerPro Systems are intended for use in the electromagnetic
environment specified below. The customer or the user of the Hall Advantage, E9000, and PowerPro
Systems should assure they are used in such an environment.
Emissions Test Compliance Electromagnetic environment - guidance
RF Emissions
CISPR 11
Group 1 The Hall Advantage, E9000, and PowerPro Systems
use RF energy only for their internal functions.
Therefore, RF emissions are very low and are not
likely to cause any interference in nearby electronic
equipment.
RF Emissions
CISPR 11
Class A The Hall Advantage, E9000, and PowerPro Systems
are suitable for use in all establishments other than
domestic, and may be used in domestic establishments
and those directly connected to the public low-voltage
power supply network that supplies buildings used for
domestic purposes, provided the following warning is
heeded:
WARNING: This equipment/system is
intended for use by healthcare professionals
only. This equipment/system may cause radio
interference or may disrupt the operation of nearby
equipment. It may be necessary to take mitigation
measures, such as re-orienting or relocating the Hall
Advantage, E9000, and PowerPro Systems or
shielding the location.
Harmonic Emissions
IEC 61000-3-2
Class A
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
Complies
To Next Page
Loading...
