15
1.6.7 PowerPro Controller Back Panel
1. “CONTROLLER FUNCTION
SELECTIONS” Switches — Used to set
specific controller functionality settings;
i.e., Day-to-Day Memory, Footswitch
Operating Mode, Handpiece Oscillate
Operating Mode, Default or Swiss
Handpiece Operating Mode, and Display
Mode (See “2.1.3.1 Controller Options/
Function Switch Settings” on page 37).
2. “IRRIGATION” Receptacle — Accepts
the Irrigation Cord connector of a Hall
Irrigation Pump.
3. Mains Receptacle — Accepts the supplied
power cable to provide AC power.
4. Voltage Selection Means — Used to set
the controller to the appropriate voltage
source (See “4.4 Fuse Replacement and
Voltage Selection Means” on page 130 for
more information).
To Next Page
Loading...
