22
1.7.4 GROUP 4 HANDPIECES
1.7.4.1 Mini-Driver Electric Handpiece
(K500)
The Mini-Driver Handpiece, combined with the
many available attachments; reaming, drilling,
wire and pin driving, and, with reciprocator and
sagittal attachments can perform sawing
applications. This handpiece is a versatile and
all-purpose handpiece powerful enough to
handle procedural requirements from a
bunionectomy to an ACL procedure. The
Mini-Driver handpiece will accept all the
attachments listed on pages 102 through 111.
1. Activation Trigger — Used to activate the
handpiece when the directional control
lever is in either forward (F) or reverse (R).
2. Safety/Directional Control Lever
Used to place the handpiece in the
safe/off position when connecting
attachments or installing accessories.
Also used to place the handpiece in an
operating direction, either forward (F) or
reverse (R).
3. Handpiece Cord Connector — The
handpiece cord connects here to provide
power to the handpiece. Uses the M334
Handpiece Cord.
4. Attachment Lock/Release Collet — Push
inward to connect an attachment. Release to
lock attachment in place.
5. Cannulation — Used to stabilize long
wires or pins.
NOTE: The Mini-Driver Handpiece does
not operate with the footswitch or integrated
console pump.
To Next Page
Loading...
