25
1.8.2.2 Operation with the CoolFlex
High Speed Drill and Group 2
Drills
1. Left Pedal — Activates the handpiece in
the Reverse direction.
2. Right Pedal — Activates the handpiece in
the Forward direction.
3. Center Pedal — This pedal is inoperative
using these drills.
1.8.2.3 Operation with Group 2 Saws
and E9015 Cranial
Perforator Drive
NOTE: There is no direction selection or
oscillate mode while using these handpieces.
1. Left Pedal — Activates the handpiece.
2. Right Pedal — Activates the handpiece.
3. Center Pedal — This pedal is inoperative
using these handpieces.
To Next Page
Loading...
