Managing and Viewing Logs
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 114
D-Link UWS User Manual
Managing and Viewing Logs
The switch may generate messages in response to events, faults, or errors occurring on the platform as well
as changes in configuration or other occurrences. These messages are stored both locally on the platform and
forwarded to one or more centralized points of collection for monitoring purposes as well as long term archival
storage. Local and remote configuration of the logging capability includes filtering of messages logged or
forwarded based on severity and generating component.
The in-memory log stores messages in memory based upon the settings for message component and severity.
Buffered Log Configuration
The buffered log stores messages in memory based upon the settings for message component and severity.
Use the Buffered Log Configuration page to set the administrative status and behavior of logs in the system
buffer.
To access the Buffered Log Configuration page, click LAN > Administration > Log > Buffered Log Configuration
in the navigation tree.
Figure 41: Buffered Log Configuration
• If you change the buffered log settings, click Submit to apply the changes to the system. To preserve the
changes after a system reboot, you must perform a save.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
