D-Link DWL-6600AP User Manual

Configuring sFlow
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 154
D-Link UWS User Manual
• Use the Refresh button to refresh the page with the most current data from the switch.
sFlow Receiver Configuration
Use the sFlow Receiver Configuration page to configure the sFlow Receiver.
To access the sFlow Receiver Configuration page, click LAN > Administration > sFlow > Receiver Configuration
in the navigation tree.
Figure 75: sFlow Receiver Configuration
Table 66: sFlow Agent Summary
Field Description
Version Uniquely identifies the version and implementation of this MIB. The version string must have
the following structure: MIB Version;Organization;Software Revision where:
• MIB Version: ‘1.3’, the version of this MIB.
• Organization: D-Link Corporation
• Revision: 1.0
Agent Address The IP address associated with this agent.

D-Link DWL-6600AP Specifications

General

2.4 GHz	Yes
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	450 Mbit/s
Power consumption (typical)	9.6 W
Internal	No
Placement	Ceiling, Wall
Certification	FCC Class B, CE Class B, C-Tick
Product color	Gray
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	2
Security algorithms	64-bit WEP, 128-bit WEP, WPA, WPA2

Weight and Dimensions

Depth	77.5 mm
Width	156 mm
Height	- mm
Weight	500 g