Monitoring Status and Statistics
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 488
D-Link UWS User Manual
Viewing Details About AP Authentication Failures
To view additional data (beacon information) for an AP in the authentication failure list, click the MAC address
of the AP.
Figure 317: AP Authentication Failure Details
The following table describes the fields on the detailed Access Point Authentication Failure Status page.
Table 286: Access Point Authentication Failure Details
Field Description
MAC Address The Ethernet address of the AP.
IP Address The network IP address of the AP.
Last Failure Type Indicates the last type of failure that occurred, which can be one of the
following:
• Local Authentication
• No Database Entry
• Not Managed
• RADIUS Authentication
• RADIUS Challenged
• RADIUS Unreachable
• Invalid RADIUS Response
• Invalid Profile ID
• Profile Mismatch-Hardware Type
• AP Relink
Vendor ID Vendor of the AP software.
Protocol Version Indicates the protocol version supported by the software on the AP.
Software Version Indicates the version of software on the AP.
Hardware Type Hardware platform for the AP.
Reporting Switch Shows whether the switch that reported the AP authentication failure is
the local switch or a peer switch.
Switch MAC Address Shows the IP address of the switch in the cluster that reported the AP
authentication failure.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
