EasyManuals Logo

D-Link DWL-6600AP User Manual

D-Link DWL-6600AP
754 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #441 background imageLoading...
Page #441 background image
Unified Wired and Wireless Access System Components
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 441
D-Link UWS User Manual
switch-address-2 192.168.19.242
switch-address-3
switch-address-4
dhcp-switch-address-1
dhcp-switch-address-2
dhcp-switch-address-3
dhcp-switch-address-4
managed-mode-watchdog 0
Configuring the DHCP Option
You can configure the IP address of the DWS-4000 Series switch as an option in the DHCP response to the DHCP
request that the AP sends the DHCP server.
The AP can learn up to four switch IP addresses or DNS names through DHCP option 43 (the Vendor
Information option) in the DHCP response. If you configured a static IP address in the AP, the AP ignores DHCP
option 43.
The format for DHCP option 43 values are defined by RFC 2132.
The procedures to add the DHCP option to the DHCP server depend on the type of DHCP server you use on
your network. If you use a Microsoft Windows 2000 or Microsoft Windows 2003 DHCP Server, you configure
the scope you use with the access points with DHCP Option 43, as the following procedures describe.
1. From the DHCP manager, right-click the applicable scope and select Configure Options...
Note: This discovery method only works if you configure the DHCP option before the AP receives its
network information from the DHCP server.

Table of Contents

Other manuals for D-Link DWL-6600AP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DWL-6600AP and is the answer not in the manual?

D-Link DWL-6600AP Specifications

General IconGeneral
2.4 GHzYes
Networking standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate450 Mbit/s
Power consumption (typical)9.6 W
InternalNo
PlacementCeiling, Wall
CertificationFCC Class B, CE Class B, C-Tick
Product colorGray
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
WAN connectionEthernet (RJ-45)
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports2
Security algorithms64-bit WEP, 128-bit WEP, WPA, WPA2
Weight and Dimensions IconWeight and Dimensions
Depth77.5 mm
Width156 mm
Height- mm
Weight500 g

Related product manuals