D-Link DWL-6600AP User Manual

Configuring L2 Features
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 181
D-Link UWS User Manual
Section 4: Configuring L2 Features
Use the pages in the L2 Features navigation tree folder to configure the Layer 2 switching features available
on the D-Link DWS-4000 Series switch. The L2 Features folder contains links to the following features:
• “Configuring and Searching the Forwarding Database”
• “Managing VLANs”
• “Configuring Protected Ports”
• “Creating MAC Filters”
• “Configuring GARP”
• “Creating Port Channels (Trunking)”
• “Configuring IGMP Snooping”
• “Configuring IGMP Snooping Queriers”
• “Configuring MLD Snooping”
• “Configuring MLD Snooping Queriers”
• “Viewing Multicast Forwarding Database Information”
• “Configuring Spanning Tree Protocol”
• “Configuring DHCP Snooping”
• “Managing LLDP”
• “Configuring Dynamic ARP Inspection”

D-Link DWL-6600AP Specifications

General

2.4 GHz	Yes
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	450 Mbit/s
Power consumption (typical)	9.6 W
Internal	No
Placement	Ceiling, Wall
Certification	FCC Class B, CE Class B, C-Tick
Product color	Gray
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	2
Security algorithms	64-bit WEP, 128-bit WEP, WPA, WPA2

Weight and Dimensions

Depth	77.5 mm
Width	156 mm
Height	- mm
Weight	500 g