D-Link DWL-6600AP User Manual

Monitoring Status and Statistics
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 504
D-Link UWS User Manual
Table 296 describes the information available on the Distributed Tunneling page for the associated client
status.
Command Buttons
The page includes the following button:
• Refresh—Updates the page with the latest information.
Table 296: Associated Client Distributed Tunneling Status
Field Description
Distributed Tunneling Status Indicates whether this client is associated with a network that supports L2
distributed tunneling.
Client Roam Status Indicates whether the client is on the Home AP or has roamed to another AP
and is using a tunnel. The field can display one of the following values:
• Home—Client is not using a tunnel.
• Roaming—Client is using a tunnel.
If distributed tunneling is disabled, the field displays the roam status as
Roaming.
Home AP MAC Address Shows the MAC Address of the Home AP for the client. The value is meaningful
only for clients that are associated with networks enabled for distributed
tunneling.
Associated AP MAC Address Shows the MAC Address of the AP to which the client roamed via the
distributed tunneling protocol.

D-Link DWL-6600AP Specifications

General

2.4 GHz	Yes
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	450 Mbit/s
Power consumption (typical)	9.6 W
Internal	No
Placement	Ceiling, Wall
Certification	FCC Class B, CE Class B, C-Tick
Product color	Gray
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	2
Security algorithms	64-bit WEP, 128-bit WEP, WPA, WPA2

Weight and Dimensions

Depth	77.5 mm
Width	156 mm
Height	- mm
Weight	500 g