D-Link DWL-6600AP User Manual

Managing LLDP
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 273
D-Link UWS User Manual
• Click Refresh to update the page with the latest information from the router.
Network Policy Information Specifies if network policy TLV is received in the LLDP frames on this port:
• Media Application Type: Specifies the application type. Types of
application types are unknown, voicesignaling, guestvoice,
guestvoicesignalling, softphonevoice, videoconferencing,
streammingvideo, vidoesignalling. Each application type that is received
has the VLAN ID, priority, DSCP, tagged bit status and unknown bit status.
A port may receive one or many such application types. If a network policy
TLV has been received on this port, only then would this information be
displayed.
• Vlan ID: Specifies the VLAN ID associated with a particular policy type.
• Priority: Specifies the priority associated with a particular policy type.
• DSCP: Specifies the DSCP associated with a particular policy type.
• Unknown Bit Status: Specifies the unknown bit associated with a
particular policy type.
• Tagged Bit Status: Specifies the tagged bit associated with a particular
policy type.
Inventory Specifies the inventory TLV is received in LLDP frames on this port:
• Hardware Revisions. Specifies hardware version of the remote device.
• Firmware Revisions. Specifies firmware version of the remote device.
• Software Revisions. Specifies software version of the remote device.
• Serial Number. Specifies serial number of the remote device.
• Manufacturer Name. Specifies manufacturer’s name of the remote device.
• Model Name. Specifies model name of the remote device.
• Asset ID. Specifies asset ID of the remote device.
Location Information Specifies if location TLV is received in LLDP frames on this port.
• Sub Type: Specifies type of location information.
• Location Information: Specifies the location information as a string for
given type of location ID.
Extended PoE Specifies if remote device is a PoE device.
• Device Type. Specifies the remote device’s PoE device type connected to
this port.
Extended PoE PSE Specifies if extended PSE TLV is received in LLDP frame on this port:
• Available: Specifies the remote port’s power sourcing equipment's (PSE)
power value in tenths of watts.
• Source: Specifies the remote port’s PSE power source.
• Priority: Specifies the remote port’s PSE power priority.
Extended PoE PD Specifies if extended PD TLV is received in LLDP frame on this port.
• Required: Specifies the remote port’s power device power requirement.
• Source: Specifies the remote port’s PD power source.
• Priority: Specifies the remote port’s PD power priority.
Table 153: LLDP-MED Remote Device Information Fields (Cont.)
Field Description

D-Link DWL-6600AP Specifications

General

2.4 GHz	Yes
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	450 Mbit/s
Power consumption (typical)	9.6 W
Internal	No
Placement	Ceiling, Wall
Certification	FCC Class B, CE Class B, C-Tick
Product color	Gray
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	2
Security algorithms	64-bit WEP, 128-bit WEP, WPA, WPA2

Weight and Dimensions

Depth	77.5 mm
Width	156 mm
Height	- mm
Weight	500 g