Chapter 1 General Descriptions
BECS-A88/C88 computerized embroidery machine owner’s manual 7
time.
20. Design Compiling
(1) Compiling the Data of Selected Design to Generate New Design
Users can compile any design according to zoom ratio, rotate angle, normal
repetition or partial repetition to generate a new design and save it in the memory
card. The newly generated design can be used for embroidering, output or other
operations.
(2) Compiling the Combined Design
System can compile the pre-set combined design to generate a new one and save
it to the memory card. The newly generated design can be used for embroidering,
output or other operations.
21. Letter Design
There are altogether 28 letter-bases. Users can make groups and change the letter
order according to different tasks. This operation is simple and easy managing.
22. Design Editing
By using this function, users may insert, modify or delete certain stitch at the
selected point. New designs can be created by this function too.
23. Speed Adjusting
The highest speed for embroidering can be set. During the process of
embroidering, speed changes automatically as long as the needle interval changes.
24. Thread Trimming
Thread trimming can be manually controlled. Trimming acts automatically at the
To Next Page
Loading...
Need help?
General
