Chapter 1 General Descriptions
6 BECS-A88/C88 computerized embroidery machine owner’s manual
14. Starting Point Saving
This function can save and store the start embroidering point of each design,
instead of repeating moving frame manually to find the design origin when
selecting the same design.
15. Mechanical Maintaining and Testing
This function is to easily judge the malfunctions when maintaining and testing,
which consists of computer testing, encoder testing, main shaft speed testing,
machine parts testing and the main shaft stopping at any position, etc.
16. Multi-Language Support
Currently, the system supports language shift among Chinese, English, Spanish
and Turkish.
17. Design Output
Design can be output and saved into floppy disk or USB disk. Adoption of
TAJIMA’s binary system enjoys the advantage of data transmitting through the
World Wide Web (other formats may not be transmitted directly).
18. Repetition Embroidery
The machine can increase embroidery productivity by repetition embroidery,
which can also be used with cyclic embroidery.
19. Cyclic Embroidery
The machine also can increase embroidery productivity by using cyclic
embroidery function, by which the machine automatically returns to the origin
point and starts the same embroidery design again when finishing the design one
To Next Page
Loading...
Need help?
General
