RS20i Installation and Operating Guide Page E-7
Appendix E. Remote Command API Document #: 9301H52900 Ver. 1.02
Monitor Level
Command: @MONITORLEVEL<space>[level]<CR>
Operation
Response: MONITORLEVEL<space>level<CR>
Read/Write
Set or read the RS20i monitor level.
Parameters
level Monitor level from 0 (minimum) to 100 (maximum).
Example
MONITORLEVEL
Send: @MONITORLEVEL 70<cr>
Receive: MONITORLEVEL 70<cr>
9. Monitor Mute
Command: @MONITORMUTE<space>[value]<CR>
Operation
Response: MONITORMUTE<space>value<CR>
Read/Write
Mute or unmute the RS20i monitor, or read the current setting.
Parameters
value Selection
0
Unmute
1
Mute
Example
Mute the monitor.
Send: @MONITORMUTE 1<cr>
Receive: MONITORMUTE 1<cr>
To Next Page
Loading...
