Datasat RS20i - 4.3.6.2 Post Process Modes


RS20iInstallationandOperatingGuide
Page 51

RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.02
4.3.6.2 Post Process Modes
The table below shows which processing modes are available for different speaker configurations. For
descriptions of the different processing modes, see 1.4.2 Surround Mode, on pa
ge 15.
Table 11. Speaker Configurations
Speaker
Configuration
Option 1 Option 2 Option 3 Option 4 Option 5
2.0 None Auro-3D
2.1 None Auro-3D
3.1 None DTS Neo:X Dolby PLII
4.1 None DTS Neo:X Dolby PLII
5.1 None DTS Neo:X Dolby PLII Auro-3D
7.1 h None DTS Neo:X Dolby PLIIz Dolby PLII
7.1 w None DTS Neo:X Dolby PLII
9.1 hw None DTS Neo:X Dolby PLIIz Dolby PLII
7.1 None DTS Neo:X Dolby PLIIx Auro-3D
9.1h None DTS Neo:X Dolby PLIIz Dolby PLIIx
9.1w None DTS Neo:X Dolby PLIIx
11.1 hw None DTS Neo:X Dolby PLIIz Dolby PLIIx
Auro 9.1 None DTS Neo:X Dolby PLIIz Dolby PLII Auro-3D
Auro 10.1 None DTS Neo:X Dolby PLIIz Dolby PLII Auro-3D
Auro 11.1 None DTS Neo:X Dolby PLIIz Dolby PLII Auro-3D
Auro 11.1 (7+4) None DTS Neo:X Dolby PLIIz Dolby PLIIx Auro-3D
Auro 13.1 None DTS Neo:X Dolby PLIIz Dolby PLIIx Auro-3D