DeLaval VMS 2008 User Manual

Troubleshooting
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
Milking Station (Mumgr) - major code 1
M m Alarm text Type Meaning ActionM m Alarm text Type Meaning Action
1 1 Robot
connected
Status
message
Robot program is activated. None required.1 1 Robot
connected
Status
message
Robot program is activated. None required.
1 2 Milking
connected
Status
message
Milking program is activated. None required.1 2 Milking
connected
Status
message
Milking program is activated. None required.
1 3 Cowtraffic
connected
Status
message
Cow traffic program is activated. None required.1 3 Cowtraffic
connected
Status
message
Cow traffic program is activated. None required.
1 4 Milktransport
connected
Status
message
Milk transport program is activated. None required.1 4 Milktransport
connected
Status
message
Milk transport program is activated. None required.
1 5 Vmsioman
connected
Status
message
MS communication and data
transfer program is activated.
None required.1 5 Vmsioman
connected
Status
message
MS communication and data
transfer program is activated.
None required.
1 6 Vmsserver
connected
Status
message
PC communication and data
transfer programs are activated.
None required.1 6 Vmsserver
connected
Status
message
PC communication and data
transfer programs are activated.
None required.
1 7 Time for
rinse
Status
message
Time for rinse. None required.1 7 Time for
rinse
Status
message
Time for rinse. None required.
1 9 Recovery
done OK
Status
message
Self test was successful. None required.1 9 Recovery
done OK
Status
message
Self test was successful. None required.
1 10 Gate ctrl
connected
Status
message
Gate controller is activated None required.1 10 Gate ctrl
connected
Status
message
Gate controller is activated None required.
1 11 Got
configuration
Status
message
The milking station has received
configuration data from the PC.
None required.1 11 Got
configuration
Status
message
The milking station has received
configuration data from the PC.
None required.
1 12 Parking cups Status
message
The teatcups have been parked
and the vacuum pump has been
switched off.
None required.1 12 Parking cups Status
message
The teatcups have been parked
and the vacuum pump has been
switched off.
None required.
1 13 Activating
cups
Status
message
The teatcups are retracted into the
magazine and the vacuum pump is
switched on.
None required.1 13 Activating
cups
Status
message
The teatcups are retracted into the
magazine and the vacuum pump is
switched on.
None required.
1 15 Cow trapped User
notification
A cow has been trapped in the
milking station in accordance with
operator settings in the PC. If the
station is not put in manual mode
within 10 minutes, the cow will be
released.
Optional (depends on the reason for
applying this function to the cow).
1 15 Cow trapped User
notification
A cow has been trapped in the
milking station in accordance with
operator settings in the PC. If the
station is not put in manual mode
within 10 minutes, the cow will be
released.
Optional (depends on the reason for
applying this function to the cow).
1 16 Autocalibrati-
on done OK
Status
message
Autocalibration of the
multi-purpose arm (robot) was
successful.
None.1 16 Autocalibrati-
on done OK
Status
message
Autocalibration of the
multi-purpose arm (robot) was
successful.
None.
1 100 Robot
disconnected
Stop alarm Robot program is deactivated.
Program error or MS computer
problem.
Restart the milking station. If the problem
persists, contact service engineer.
1 100 Robot
disconnected
Stop alarm Robot program is deactivated.
Program error or MS computer
problem.
Restart the milking station. If the problem
persists, contact service engineer.
1 101 Milking
disconnected
Stop alarm Milking program is deactivated.
Program error or MS computer
problem.
Restart the milking station. If the problem
persists, contact service engineer.
1 101 Milking
disconnected
Stop alarm Milking program is deactivated.
Program error or MS computer
problem.
Restart the milking station. If the problem
persists, contact service engineer.
1 102 Cowtraffic
disconnected
Stop alarm Cow traffic program is
deactivated. Program error or MS
computer problem.
Restart the milking station. If the problem
persists, contact service engineer.
1 102 Cowtraffic
disconnected
Stop alarm Cow traffic program is
deactivated. Program error or MS
computer problem.
Restart the milking station. If the problem
persists, contact service engineer.
1 103 Milktransport
disconnected
Stop alarm Milk transport program is
deactivated. Program error or MS
computer problem.
Restart the milking station. If the problem
persists, contact service engineer.
1 103 Milktransport
disconnected
Stop alarm Milk transport program is
deactivated. Program error or MS
computer problem.
Restart the milking station. If the problem
persists, contact service engineer.
156(198)

DeLaval VMS 2008 Specifications

General

Brand	DeLaval
Model	VMS 2008
Category	Farm Equipment
Language	English