DeLaval VMS 2008 - Page 196

Troubleshooting
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
M m Alarm text Type Meaning ActionM m Alarm text Type Meaning Action
9 11 Milk is
diverted
automaticall-
y, due to
elevated
conductivity
User
notification
DeLaval milk meter(s) MM25
indicates increased conductivity
values for the milk. The milk has
been diverted to drain/milk divert
unit.
The values exceed the level set in
the management software.
Conductivity is measured in
microsiemens per centimetre. The
destination of the milk is also set in
the management software.
Check health status of animal.9 11 Milk is
diverted
automaticall-
y, due to
elevated
conductivity
User
notification
DeLaval milk meter(s) MM25
indicates increased conductivity
values for the milk. The milk has
been diverted to drain/milk divert
unit.
The values exceed the level set in
the management software.
Conductivity is measured in
microsiemens per centimetre. The
destination of the milk is also set in
the management software.
Check health status of animal.
9 12 Milk is
diverted
automaticall-
y, due to
blood level
User
notification
DeLaval milk meter(s) MM25
indicates blood in the milk. The
milk has been diverted to
drain/milk divert unit.
The concentration exceeds the
level set in the management
software. Concentration of blood is
measured in ppm, parts per
million. The destination of the milk
is also set in the management
software.
Check health status of animal.9 12 Milk is
diverted
automaticall-
y, due to
blood level
User
notification
DeLaval milk meter(s) MM25
indicates blood in the milk. The
milk has been diverted to
drain/milk divert unit.
The concentration exceeds the
level set in the management
software. Concentration of blood is
measured in ppm, parts per
million. The destination of the milk
is also set in the management
software.
Check health status of animal.
9 14 Can not
send out
alarms.
Check
communicati-
on
equipment!
User
notification
Alarms cannot be transmitted via
the modem.
Check the modem, cable and telephone
line. Restart the PC.
9 14 Can not
send out
alarms.
Check
communicati-
on
equipment!
User
notification
Alarms cannot be transmitted via
the modem.
Check the modem, cable and telephone
line. Restart the PC.
9 15 Blood level
in milk is
over ... ppm!
User
notification
DeLaval milk meter(s) MM25
indicates blood in the milk from
one or several quarters. The milk
may or may not have been
diverted. The action depends on
the concentration level set in the
management software.
Concentration of blood is
measured in ppm, parts per
million.
Check health status of animal.9 15 Blood level
in milk is
over ... ppm!
User
notification
DeLaval milk meter(s) MM25
indicates blood in the milk from
one or several quarters. The milk
may or may not have been
diverted. The action depends on
the concentration level set in the
management software.
Concentration of blood is
measured in ppm, parts per
million.
Check health status of animal.
9 16 Can not
connect to
milking
station
Stop alarm The PC cannot establish
communication with the milking
station.
Check that the milking station has been
started. Check the ethernet cable and its
connection points.
9 16 Can not
connect to
milking
station
Stop alarm The PC cannot establish
communication with the milking
station.
Check that the milking station has been
started. Check the ethernet cable and its
connection points.
188(198)