Troubleshooting
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
Data communication between milking
station and PC - major code 9
M m Alarm text Type Meaning ActionM m Alarm text Type Meaning Action
9 1 AMD- Check
Cow!
Deviation The last milking of the cow showed
abnormal milk values for one or
some of the quarters.
In technical terms, this means that
the milk meter data for the cow is
outside the predefined range.
The cow might be or become ill, for
example mastitis.
Feed and water consumption
might not be normal.
Check the health status of the cow. Keep
her under observation for a few days. If she
is healthy and not becoming ill, "reset" her
in the management software (Cow
Monitoring).
9 1 AMD- Check
Cow!
Deviation The last milking of the cow showed
abnormal milk values for one or
some of the quarters.
In technical terms, this means that
the milk meter data for the cow is
outside the predefined range.
The cow might be or become ill, for
example mastitis.
Feed and water consumption
might not be normal.
Check the health status of the cow. Keep
her under observation for a few days. If she
is healthy and not becoming ill, "reset" her
in the management software (Cow
Monitoring).
9 2 Milking
Station is
disconnected
Stop alarm The PC lost contact with the
milking station.
Restart the milking station. If the problem
persists, contact service engineer.
Service engineer only: check the
connections.
9 2 Milking
Station is
disconnected
Stop alarm The PC lost contact with the
milking station.
Restart the milking station. If the problem
persists, contact service engineer.
Service engineer only: check the
connections.
9 3 Vms server
is
disconnected
Stop alarm The programs that manage the
communication between the PC
and milking station have stopped
running, or their execution are
severely impaired.
The PC will try to restart
automatically when this occurs. If
communication is established
successfully, the system will
continue operating in automatic
mode.
Restart the PC. If the problem remains,
contact service engineer.
9 3 Vms server
is
disconnected
Stop alarm The programs that manage the
communication between the PC
and milking station have stopped
running, or their execution are
severely impaired.
The PC will try to restart
automatically when this occurs. If
communication is established
successfully, the system will
continue operating in automatic
mode.
Restart the PC. If the problem remains,
contact service engineer.
9 4 Vms server
is stopped
Stop alarm See alarm "Vms server is
disconnected" above (major code
9, minor code 3).
Restart the PC. If the problem remains,
contact service engineer.
9 4 Vms server
is stopped
Stop alarm See alarm "Vms server is
disconnected" above (major code
9, minor code 3).
Restart the PC. If the problem remains,
contact service engineer.
9 6 Milking
station has
been idle for
... minutes
User
notification
No significant operation has taken
place in the milking station for x
minutes. The station has been in
the same state for x minutes.
The number of minutes the milking
station must be idle before the
alarm is issued (x) can be set in
the management software.
Visit the barn and find the reason for the
inactivity.
9 6 Milking
station has
been idle for
... minutes
User
notification
No significant operation has taken
place in the milking station for x
minutes. The station has been in
the same state for x minutes.
The number of minutes the milking
station must be idle before the
alarm is issued (x) can be set in
the management software.
Visit the barn and find the reason for the
inactivity.
9 7 Milking
Station is
stopped
Stop alarm The PC lost contact with the
milking station.
Restart the milking station. If the problem
persists, contact service engineer.
Service engineer only: check the
connections.
9 7 Milking
Station is
stopped
Stop alarm The PC lost contact with the
milking station.
Restart the milking station. If the problem
persists, contact service engineer.
Service engineer only: check the
connections.
9 8 MS and
Serve have
different
versions, ...
and ...
Stop alarm The actual version of the software
running in the milking station and
the one specified in the
management software (VMS
Config) differs.
Contact service engineer.
Service engineer only:
- Enter the actual version of the software
running in the milking station.
9 8 MS and
Serve have
different
versions, ...
and ...
Stop alarm The actual version of the software
running in the milking station and
the one specified in the
management software (VMS
Config) differs.
Contact service engineer.
Service engineer only:
- Enter the actual version of the software
running in the milking station.
187(198)
To Next Page
Loading...
