User's Guide
- 112 -
• Orientation—This specifies the orientation of the original document, and then changes the Sides
(Duplex) and Binding settings to match the orientation.
• Binding—This specifies if the original document is bound on the long-edge or short-edge side.
Custom Job
This option lets you combine multiple scan jobs into a single job and appears only when a working printer
hard disk is installed.
Scan Preview
This option lets you view the first page of the image before it is included in the e-mail. When the first page
is scanned, the scanning is paused and a preview image appears.
Note: This option appears only when a working printer hard disk is installed.
Transmission Log
This option lets you print the transmission log or transmission error log.
Edge Erase
This option lets you remove smudges or any mark around the edges of a document. You can remove an
equal area around all four sides of the paper, or you can pick a particular edge. Edge Erase also removes
whatever is within the area selected, leaving nothing on that portion of the scan.
Advanced Imaging
This option lets you adjust the Background Removal, Color Balance, Color Dropout, Contrast, JPEG
Quality, Mirror Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature
settings before you e-mail the document.
Fix Scan Skew
This option lets you straighten scanned images that are slightly skewed when received from the ADF tray.
To Next Page
Loading...
