Develop ineo 4020 - Copying on Specialty Media

User's Guide
- 93 -
Copying on specialty media
Copying on transparencies
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. From the home screen, navigate to:
Copy >Copy from > select the size of the original document
3. Navigate to:
Copy to > select the tray that contains transparencies >Copy It
If there are no trays that support transparencies, then navigate to:
Multipurpose Feeder > select the size of the transparencies >Transparency
4. Load transparencies into the multipurpose feeder, and then touch Copy It.
Copying on letterhead
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. From the home screen, navigate to:
Copy >Copy from > select the size of the original document
3. Touch Copy to > Multipurpose Feeder.
4. Place the letterhead faceup, top edge first into the multipurpose feeder.
5. Select the size of the letterhead, and then touch Letterhead >Copy It.