Develop ineo 4020 - Fax Settings Menu

User's Guide
- 192 -
Use
To
Adjust ADF Skew
Auto
Off
On
Correct slight skew in the scanned image.
Note: Off is the factory default setting.
Scan Edge to Edge
Off
On
Specify if the original document is scanned edge-to-edge prior to faxing.
Note: Off is the factory default setting.
Sharpness
1–5
Adjust the amount of sharpness of a copy.
Note: 3 is the factory default setting.
Sample Copy
Off
On
Create a sample copy of the original document.
Note: Off is the factory default setting.
Fax Settings menu
Fax Mode (Analog Fax Setup) menu
Analog Fax Setup mode sends the fax job through a telephone line.
Use
To
Restore Factory Defaults
Restore Defaults
Cancel
This operation will restore all fax settings to their factory default values.
Optimize Fax Compatibility
Change Settings
Cancel
This operations configures your fax machine for optimal compatibility with other
fax machines.
Fax Name
Specify the name of the fax in the printer.
Fax Number
Specify the number assigned to the fax.
Fax ID
Fax Name
Fax Number
Specify how the fax is identified.