Develop ineo 4020 - Adjusting Toner Darkness; Printing from a Flash Drive

User's Guide
- 84 -
2. From the Print dialog and pop-up menus, adjust the settings if necessary.
Note: To print on a specific paper type, adjust the paper type setting to match the paper
loaded, or select the appropriate tray or feeder.
3. Click Print.
Adjusting toner darkness
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
- View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Print Settings >Quality Menu >Toner Darkness.
3. Adjust the setting, and then click Submit.
Using the printer control panel
1. From the home screen, navigate to:
>Settings >Print Settings >Quality Menu >Toner Darkness
2. Adjust the setting, and then touch
.
Printing from a flash drive
Printing from a flash drive
Notes:
• Before printing an encrypted PDF file, you will be prompted to type the file password from the printer
control panel.
• You cannot print files for which you do not have printing permissions.