Develop ineo 4020 - Large Jobs Do Not Collate

User's Guide
- 307 -
Large jobs do not collate
Action
Yes
No
Step 1
1. From the Finishing menu on the printer control panel, set Collate to “(1,2,3)
(1,2,3).”
2. Resend the print job.
Did the job print and collate correctly?
The problem
is solved.
Go to step 2.
Step 2
1. From the printer software, set Collate to “(1,2,3) (1,2,3).”
Note: Setting Collate to “(1,1,1) (2,2,2)” in the software overrides the
setting in the Finishing menu.
2. Resend the print job.
Did the job print and collate correctly?
The problem
is solved.
Go to step 3.
Step 3
Reduce the complexity of the print job by eliminating the number and size of
fonts, the number and complexity of images, and the number of pages in the
job.
Did the job print and collate correctly?
The problem
is solved.
Contact
technical
support.