Develop ineo 4020 - Caller ID Is Not Shown

User's Guide
- 340 -
Action
Yes
No
From the home screen, navigate to:
>Settings >General Settings >Run initial setup >Yes
>Submit
Turn off the printer, and then turn it back on.
The “Select your language” screen appears on the printer
display.
Select a language, and then touch
.
Select a country or region, and then touch Next.
Select a time zone, and then touch Next.
Select Fax and E-mail, and then touch Next.
Are fax and e-mail functions set up?
The problem is
solved.
Contact technical
support.
Caller ID is not shown
Action
Yes
No
Contact your telephone company to check if your telephone line is subscribed to
the caller ID service.
Notes:
If your region supports multiple caller ID patterns, then you may have to change
the default setting. There are two settings available: FSK (pattern 1) and DTMF
(pattern 2).
The availability of these settings in the Fax menu depends on whether your
country or region supports multiple caller ID patterns.
Contact your telephone company to determine which pattern or switch setting to
use.
Does the caller ID appear?
The problem
is solved.
Contact
technical
support.