User's Guide
- 171 -
Security menu
Miscellaneous Security Settings menu
Login Failures
Failure Time Frame
Lockout Time
Panel Login Timeout
Remote Login Timeout
Limit the number and time frames of failed login attempts from the printer
control panel before all users are locked out.
Notes:
• Login Failures specifies the number of failed login attempts before users
are locked out. Settings range from 1–10. 3 attempts is the factory default
setting.
• Failure Time Frame specifies the time frame during which failed login
attempts can be made before users are locked out. Settings range from 1–
60 minutes. 5 minutes is the factory default setting.
• Lockout Time specifies how long users are locked out after exceeding the
login failures limit. Settings range from 1–60 minutes. 5 minutes is the
factory default setting. 1 indicates the scanner does not impose a lockout
time.
• Panel Login Timeout specifies how long the scanner remains idle on the
home screen before automatically logging the user off. Settings range from
1–900 seconds. 30 seconds is the factory default setting.
• Remote Login Timeout specifies how long a remote interface remains idle
before automatically logging the user off. Settings range from 1–120
minutes. 10 minutes is the factory default setting.
1–16
Limit the digit length of the PIN.
Note: 4 is the factory default setting.
To Next Page
Loading...
