Develop ineo 4020 - Custom Scan Sizes Menu

User's Guide
- 156 -
Custom Scan Sizes menu
Use
To
Custom Scan Size [x]
Scan Size Name
Width
Height
Orientation
Portrait
Landscape
2 scans per side
Off
On
Specify a custom scan size name and page orientation.
Notes:
• The custom scan size name replaces Custom Scan Size [x] in the
printer menus.
• ADF Media Type is the factory default setting for custom scan sizes 3,
4, 5, and 6.
• 210 millimeters is the factory default setting for Width.
• 297 millimeters is the factory default setting for Height.
• Portrait is the factory default setting for Orientation.
• Off is the factory default setting for “2 scans per side.”