Develop ineo 4020 - Skewed Print

User's Guide
- 324 -
Action
Yes
No
Step 6
Redistribute the toner in the imaging
unit.
Remove the toner cartridge, and
then the imaging unit.
Firmly shake the imaging unit.
Warning—Potential
Damage: Do not expose
the imaging unit to direct
light for more than 10
minutes. Extended
exposure to light may cause
print quality problems.
Install the imaging unit, and then the
cartridge.
Resend the print job.
Is the print still too light?
Go to step 7.
The problem is solved.
Step 7
Replace the imaging unit, and then
resend the print job.
Is the print still too light?
Contact technical support.
The problem is solved.
Skewed print