Develop ineo 4020 - Ftp Settings Menu

User's Guide
- 209 -
FTP Settings menu
Use
To
Format
PDF (.pdf)
Secure PDF (.pdf)
TIFF (.tif)
JPEG (.jpg)
XPS (.xps)
Specify the format of the file for FTP sending.
Note: PDF (.pdf) is the factory default setting.
PDF Version
1.2–1.6
A–1a
Set the version level of the PDF file for FTP sending.
Note: 1.5 is the factory default setting.
Content Type
Text
Graphics
Text/Photo
Photo
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
Content Source
Black/White Laser
Color Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Specify how the original document was produced.
Note: Black/White Laser is the factory default setting.
Resolution
75 dpi
150 dpi
200 dpi
300 dpi
400 dpi
600 dpi
Specify the quality of the scan in dots per inch (dpi).
Note: “150 dpi” is the factory default setting.
Darkness
1–9
Lighten or darken the output.
Note: 5 is the factory default setting.