Develop ineo 4020 - Page 208

User's Guide
- 208 -
Use
To
Shadow Detail
-4 to 4
Adjust the amount of shadow detail visible on a scanned image.
Note: 0 is the factory default setting.
Fix Scan Skew
Auto
Off
On
Correct slight skew in the scanned image.
Notes:
• Off is the factory default setting.
• This menu item appears only in select printer models.
Scan edge to edge
Off
On
Specify whether the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Sharpness
1–5
Adjust the amount of sharpness on a scanned image.
Note: 3 is the factory default setting.
Temperature
-4 to 4
Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a
bluer output than the default, while “warm” values generate a redder output than
the default.
Note: 0 is the factory default setting.
Use cc:/bcc:
Off
On
Enable the use of the cc and bcc fields.
Note: Off is the factory default setting.