Develop ineo 4020 - Placing Information on Copies

User's Guide
- 99 -
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the home screen, navigate to:
Copy >Paper Saver > select the output you want >
>Copy It
Note: If Paper Saver is set to Off, then the Print Page Borders option is unavailable.
Placing information on copies
Placing a header or footer on pages
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the home screen, navigate to:
Copy >Header/Footer
4. Select Header or Footer, and then touch
.
5. Select where you want to insert the header or footer, then select a text option, and then touch
.
6. Select where you want to print the header or footer, and then touch
.
7. From the Header/Footer menu, touch
>Copy It.