Develop ineo 4020 - Tray Linking Does Not Work

User's Guide
- 306 -
Tray linking does not work
Notes:
• The trays can detect paper length.
• The multipurpose feeder does not automatically detect the paper size. You must set the size from the
Paper Size/Type menu.
Action
Yes
No
Step 1
1. Open the trays, and then check if they contain paper of the same size
and type.
- Check if the paper guides are in the correct positions for the size of
the paper loaded in each tray.
- Check if the paper size indicators on the paper guides are aligned
with the paper size indicators on the tray.
2. Resend the print job.
Do the trays link correctly?
The problem is
solved.
Go to step 2.
Step 2
1. From the printer control panel, set the paper size and type in the Paper
menu to match the paper loaded in the trays to be linked.
Note: The paper size and type must match for trays to be linked.
2. Resend the print job.
Do the trays link correctly?
The problem is
solved.
Contact
technical
support.