Develop ineo 4020 - Customizing Fax Settings

User's Guide
- 129 -
4. Assign a shortcut number.
Note: If you enter a number that is already in use, then you are prompted to select another number.
5. Click Add.
Creating a fax destination shortcut using the printer control panel
1. From the home screen, touch Fax, and then enter the fax number.
To create a group of fax numbers, touch
, and then enter the other fax number.
2. Touch
.
3. Type a unique name for the shortcut, and then touch
.
4. Verify that the shortcut name and number are correct, and then touch OK.
If the name or number is incorrect, then touch Cancel, and then reenter the information.
Customizing fax settings
Changing the fax resolution
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the home screen, touch Fax, and then enter the fax number.
4. From the Resolution area, touch
or to change to the resolution you want.
Note: Settings range from Standard (fastest speed) to Ultra Fine (best quality at a reduced speed).
5. Touch Fax It.
Making a fax lighter or darker
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.