Develop ineo 4020 - Copying Using the ADF; Copying Using the Scanner Glass; Copying Photos

User's Guide
- 92 -
Copying using the ADF
1. Load an original document faceup, short edge first into the ADF tray.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. Adjust the paper guides.
3. From the home screen, navigate to:
Copy > specify the copy settings >Copy It
Copying using the scanner glass
1. Place an original document facedown on the scanner glass in the upper left corner.
2. From the home screen, navigate to:
Copy > specify the copy settings >Copy It
If you have more pages to scan, then place the next document on the scanner glass, and then touch
Scan the next page.
3. Touch Finish the Job.
Copying photos
1. Place a photo facedown on the scanner glass in the upper left corner.
2. From the home screen, navigate to:
Copy >Content >Photo >
3. From the Content Source menu, navigate to:
Photo/Film >
>Copy It
Note: If you have more photos to copy, then place the next photo on the scanner glass, and then
touch Scan the next page.
4. Touch Finish the Job.