User's Guide
- 123 -
Connecting the printer to a wall jack in Germany
The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering
machines. The F port is for telephones.
Connect the printer to any of the N ports.
1. Connect one end of the telephone cable that came the printer to the
port of the printer.
2. Connect the other end of the telephone cable to the RJ-11 adapter, and then connect the adapter to
an N port.
3. If you want to connect a telephone and answering machine to the same wall jack, then connect the
devices as shown.
Note: Do not remove the adapter plug from the
port of the printer if you are connecting to a serial
or cascaded telephone system.
To Next Page
Loading...
