Develop ineo 4020 - Page 190

User's Guide
- 190 -
Use
To
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Place a sheet of paper between pages, copies, or jobs.
Note: Off is the factory default setting.
Separator Sheet Source
Tray [x]
Specify the separator sheet source.
Note: Tray 1 is the factory default setting.
Darkness
1–9
Specify the level of darkness for the copy job.
Note: 5 is the factory default setting.
Number of Copies
1–999
Specify the number of copies for the copy job.
Note: 1 is the factory default setting.
Header/Footer
[Location]
Off
Date/Time
Page number
Custom text
Print on
All pages
First page only
All but first page
Custom text
Specify the header or footer information and its location on the page.
For the location, select from the following options:
• Top left
• Top middle
• Top right
• Bottom left
• Bottom middle
• Bottom right
Notes:
• Off is the factory default setting for the location.
• “All pages” is the factory default setting for “Print on.”
Overlay
Confidential
Copy
Draft
Urgent
Custom
Off
Specify the overlay text printed on each page of the copy job.
Note: Off is the factory default setting.