Develop ineo 4020 - Page 213

User's Guide
- 213 -
Use
To
Fix Scan Skew
Auto
Off
On
Correct slight skew in the scanned image.
Notes:
• Off is the factory default setting.
• This menu item is supported only in select printer models.
Scan edge to edge
Off
On
Specify whether the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Sharpness
1–5
Adjust the amount of sharpness of a scanned image.
Note: 3 is the factory default setting.
Temperature
-4 to 4
Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a
bluer output than the default while “warm” values generate a redder output than
the default.
Note: 0 is the factory default setting.