Develop ineo 4020 - Page 216

User's Guide
- 216 -
Use
To
JPEG Quality
Best for content
5–90
Set the quality of a JPEG photo image in relation to file size and quality.
Notes:
• “Best for content” is the factory default setting.
• 5 reduces the file size, but the quality of the image is lessened.
• 90 provides the best image quality, but the file size is very large.
• This menu setting applies to all scan functions.
Text Default
5–90
Set the quality of the text in relation to file size and the quality of the image.
Note: 75 is the factory default setting.
Text/Photo Default
5–90
Set the quality of a text or photo image in relation to file size and quality.
Note: 75 is the factory default setting.
Photo Default
5–90
Set the quality of a photo image in relation to file size and quality.
Note: 50 is the factory default setting.
Use Multi-Page TIFF
On
Off
Provide a choice between single-page TIFF files and multiple-page TIFF files.
For a multiple-page scan-to-FTP job, either one TIFF file is created containing
all the pages, or multiple TIFF files are created with one file for each page.
Notes:
• On is the factory default setting.
• This menu setting applies to all scan functions.
Scan Bit Depth
1 bit
8 bit
Enable the Text/Photo mode to have smaller file sizes by using 1-bit images.
Note: “8 bit” is the factory default setting.
File Name
Type a base file name.
Note: You can enter a maximum of 53 characters.
Custom Job Scanning
On
Off
Copy a document containing mixed paper sizes in a single copy job.
Note: Off is the factory default setting.