Develop ineo 4020 - Page 276

User's Guide
- 276 -
Fax partition inoperative. Contact system administrator.
Try either of the following:
• From the printer control panel, select Continue to clear the message. For non-touch-screen printer
models, press
to confirm.
• Turn the printer off, and then turn it back on. If the message appears again, then contact your system
support person or see the “Setting up the printer to fax” section of the User’s Guide.
Fax server 'To Format' not set up. Contact system administrator.
Try either of the following:
• From the printer control panel, select Continue to clear the message. For non-touch-screen printer
models, press
to confirm.
• Complete the Fax Server setup. If the message appears again, then contact your system support
person.
Fax Station Name not set up. Contact system administrator.
Try either of the following:
• From the printer control panel, select Continue to clear the message. For non-touch-screen printer
models, press
to confirm.
• Complete the Analog Fax Setup. If the message appears again after completing the setup, then
contact your system support person.
Fax Station Number not set up. Contact system administrator.
Try either of the following:
• From the printer control panel, select Continue to clear the message. For non-touch-screen printer
models, press
to confirm.
• Complete the Analog Fax Setup. If the message appears again after completing the setup, then
contact your system support person.
Imaging unit low [84.xy]
You may need to order an imaging unit. If necessary, select Continue on the printer control panel to clear
the message and continue printing. For non-touch-screen printer models, press
to confirm.