Develop ineo 4020 - Page 321

User's Guide
- 321 -
Action
Yes
No
Step 1
From the Quality menu on the printer
control panel, reduce the toner darkness.
Note: 8 is the factory default setting.
Resend the print job.
Is the print still too dark?
Go to step 2.
The problem is solved.
Step 2
From the printer control panel, set the
paper type, texture and weight in the
Paper menu to match the paper loaded in
the tray.
Resend the print job.
Is the tray set to the type, texture, and
weight of the paper loaded?
Go to step 3.
Do one or more of the following:
Specify the paper type, texture,
and weight from the tray settings
to match the paper loaded in the
tray.
Change the paper loaded in the
tray to match the paper type,
texture and weight specified in
the tray settings.
Step 3
Depending on your operating system,
specify the paper type, texture and
weight from Printing Preferences or from
the Print dialog.
Resend the print job.
Is the print still too dark?
Go to step 4. The problem is solved.
Step 4
Check if the paper loaded in the tray has
texture or rough finishes.
Are you printing on textured or rough
paper?
From the printer control panel,
change the texture settings in the
Paper Texture menu to match the
paper you are printing on.
Go to step 5.