Develop ineo 4020 - Page 353

User's Guide
- 353 -
Action
Yes
No
Step 4
Check the placement of the document or photo.
Make sure the document or photo is loaded
facedown on the scanner glass in the upper left
corner.
Is the document or photo loaded correctly?
Go to step 5.
Place the document or photo facedown
on the scanner glass in the upper left
corner.
Step 5
Send a print job, and then check for print quality
problems.
From the General Settings menu, adjust the Eco-Mode
settings.
From the Copy menu, adjust the toner darkness.
When the print becomes faded, replace the toner
cartridge.
Is the print quality satisfactory?
Go to step 6.
See Print quality problems.
Step 6
Increase the scan resolution settings for a higher-
quality output.
Did the increased resolution produce a higher-quality
output?
Problem
solved.
Go to step 7.
Step 7
Check the scan settings.
From the Scan screen, make sure the Content
Type and Content Source settings are correct for
the document being scanned.
Are the Content Type and Content Source settings
correct for the document being scanned?
Contact
technical
support.
Change the Content Type and Content
Source settings to match the document
being scanned.