Develop ineo 4020 - Page 356

User's Guide
- 356 -
Action
Yes
No
Step 2
Make sure the printer IP address is correct.
View the printer IP address:
From the TCP/IP section in the Network/Ports menu
By printing a network setup page or menu settings page, and then finding the
TCP/IP section
Note: An IP address appears as four sets of numbers separated by
periods, such as 123.123.123.123.
Open a Web browser, and then type the IP address.
Note: Depending on the network settings, you may need to type “https://”
instead of “http://” before the printer IP address to access the Embedded
Web Server.
Press Enter.
Does the Embedded Web Server open?
The
problem is
solved.
Go to step 3.
Step 3
Check if the network is working.
Print a network setup page.
Check the first section of the network setup page and confirm that the status is
Connected.
Note: If the status is Not Connected, then the connection may be intermittent,
or the network cable may be defective. Contact your system support person
for a solution, and then print another network setup page.
Open a Web browser, and then type the printer IP address.
Press Enter.
Does the Embedded Web Server open?
The
problem is
solved.
Go to step 4.