Develop ineo+ 650 - Inserting Copies of a Different Document for a Specified Page (Insert Image Function)

ineo+ 650/550/451 2-107
Copy Operations
2
2.29 Inserting copies of a different document for a specified page ("Insert
Image" function)
A multi-page document later scanned from the original glass can be inserted at the specified location in a
document first scanned with the ADF. The inserted document is added after the specified pages.
!
Detail
A separate document can be inserted at a maximum of 30 locations within a document of up to 999
pages.
In double-sided documents, one double-sided page is considered to be two pages (one for the front
and one for the back).
1 Load the document into the ADF.
– For details on positioning the document, refer to "Feeding the document" on page 2-26.
– For a document that exceeds 100 pages, refer to "Scanning the document in separate batches
("Separate Scan" setting)" on page 2-28.
2 Touch [Application], and then touch [Sheet/Cover/Chapter Insert].
– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
The Sheet/Cover/Chapter Insert screen appears.