Develop ineo+ 650 - 3.8 Setting up the PostScript driver for Windows

1
Introduction
1-20 ineo+ 650/550/451
1.8 Space requirements
To ensure that machine operation, consumables replenishing, part replacement, and regular maintenance
can easily be performed, adhere to the recommended space requirements detailed below.
2
Reminder
Be sure to allow a clearance of 100 mm (4 in.) or more at the back of this machine for the ventilation
duct.
Unit: mmineo+ 451/550/650+FS-608+LU-301(+PI-503)
806.5 958.3 387 391.9 1130 50
1155 494
Unit: mm ineo+ 451+FS-519+SD-505+LU-301
2090.9
555 958.3 387
190.6
1649
1155 494
1571.9
391.9 1130
50