ineo+ 650/550/451 2-25
Copy Operations
2
When loading label sheets, load them in the w orientation, as shown in the illustration. Do not load label
sheets in the v orientation.
A maximum of 50 label sheets can be loaded into the bypass tray.
Be sure to load letterhead paper so that the side to be printed on faces up.
2
Note
The image will be printed on the surface of the paper facing down when the paper is loaded into the
bypass tray.
!
Detail
For details on specifying the paper size for the bypass tray, refer to "Selecting a paper size setting
("Size" setting)" on page 2-84.
For details on the paper sizes, refer to "Copy paper" on page 2-79.
Side to be
printed on
To Next Page
Loading...
