Digi DC-150 - Page 26

25
Auto Job No. Entry
21. Enter Scale No.
Ex.) Auto Job No. 1 for Receiving
(1) 1
Operation
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
22. Depress [SHIFT DOWN] key then [H/ IN ]
key within 3 seconds. *1
* 0.0000 0. 0
∇ ∇ ∇ ∇
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
Tare Entry
ONE TOUCH TARE
23. Place a container on the scale when
stable. Ex.) 0.0120kg
* 0.0120 0. 0
∇ ∇
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
24. Depress [TARE] key. *2
* 0.0000 0. 0
∇ ∇ ∇ ∇
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
DIGITAL TARE
23’. Enter Tare Weight value by numeric keys.
Ex.) 0.0120kg
(6) 0.0120
∇ ∇
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
24’. Depress [TARE] key. *2
* - 0.0120 0. 0
∇ ∇ ∇ ∇
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
Note: *1) Auto Job no. can be selected from 5 patterns which are programmed in
Maintenance Mode.
Auto Job no. for shipping and non-add operation can be selected with the same
operation as the receiving except using [I/OUT] or [J/NON-ADD]] key instead of [H]
key
Note: *2) To clear tare value, press [0] then [TARE] key.
All manuals and user guides at all-guides.com
all-guides.com