Digi DC-150 - Page 78

77
SPEC 14: Print Auto Job No. for Non-add operation on Item Report
(This SPEC actives only when SPEC 00 of REPORT SPEC is set to “SELECT”)
Y:
Allow
N:
Inhibit
SPEC 15: Print Items in Today’s Movement Report
ALL:
All Items
SELECT:
Selected Items
SPEC 16: Print Parts No. on Today’s Movement Report
(This SPEC actives only when SPEC 15 of REPORT SPEC is set to “SELECT”)
Y:
Allow
N:
Inhibit
SPEC 17: Print Parts Name on Today’s Movement Report
(This SPEC actives only when SPEC 15 of REPORT SPEC is set to “SELECT”)
Y:
Allow
N:
Inhibit
SPEC 18: Print Unit Weight on Today’s Movement Report
(This SPEC actives only when SPEC 15 of REPORT SPEC is set to “SELECT”)
Y:
Allow
N:
Inhibit
SPEC 19: Print Shelf Location no. on Today’s Movement Report
(This SPEC actives only when SPEC 15 of REPORT SPEC is set to “SELECT”)
Y:
Allow
N:
Inhibit
SPEC 20: Print Inventory on Today’s Movement Report
(This SPEC actives only when SPEC 15 of REPORT SPEC is set to “SELECT”)
Y:
Allow
N:
Inhibit
SPEC 21: Print Threshold on Today’s Movement Report
(This SPEC actives only when SPEC 15 of REPORT SPEC is set to “SELECT”)
Y:
Allow
N:
Inhibit
All manuals and user guides at all-guides.com