Dodge Intrepid - Page 576

(2) Install low/reverse piston retainer gasket (Fig.
79).
(3) Install low/reverse piston retainer (Fig. 80).
(4) Install low/reverse piston retainer-to-case
screws (Fig. 81) and torque to 5 N·m (45 in. lbs.).
(5) Install low/reverse clutch piston (Fig. 82).
Fig. 79 Install Piston Retainer Gasket
1 - GASKET HOLES MUST LINE UP
2 - LOW/REVERSE CLUTCH PISTON RETAINER GASKET
Fig. 80 Install Piston Retainer
1 - LOW/REVERSE CLUTCH PISTON RETAINER
2 - GASKET
Fig. 81 Install Retainer Attaching Screws
1 - LOW/REVERSE CLUTCH PISTON RETAINER
2 - SCREWDRIVER
3 - TORX-LOC SCREWS
Fig. 82 Install Low/Reverse Clutch Piston
1 - LOW/REVERSE CLUTCH PISTON
2 - D-RING SEAL
3 - D-RING SEAL
LH TRANSAXLE 21 - 29
42LE AUTOMATIC TRANSAXLE (Continued)