Dodge Intrepid - Page 707

(9) Remove separator plate from transfer plate
(Fig. 423).
(10) Remove oil screen (Fig. 424) from transfer
plate.
(11) Remove thermal valve (Fig. 425) from transfer
plate.
(12) Remove valve body check balls. Note their
location for assembly ease (Fig. 426).
(13) Remove 2/4 accumulator assembly as shown
in (Fig. 427).
(14) Remove dual retainer plate from valve body.
Use special tool 6301 to remove plate (Fig. 428).
Fig. 423 Remove Separator Plate to Transfer Plate
1 - SEPARATOR PLATE
2 - TRANSFER PLATE
Fig. 424 Remove Oil Screen to Transfer Plate
1 - OIL SCREEN
Fig. 425 Remove Thermal Valve to Transfer Plate
1 - THERMAL VALVE
21 - 160 TRANSAXLE LH
VALVE BODY (Continued)