108 of 152 PSS5000/TEMA/803046/05
PSS 5000 – Technical Manual
9 W&M (Menu W)
9.3 Memory Module Version (Menu W.3)
Description of Memory
Module Version menu
Using the Memory Module Version menu, you can view the program version
and checksum for each memory module.
Note: This menu is only relevant if the PSS 5000 is configured with at least
one memory module and the memory module(s) must be configured in
the setup.ini file. For information about configuring the file see
‘5.7 Peripheral Configuration (Menu 2.7)’ on page 57.
To view the memory
module details with web
service pages
This procedure describes how to use the Service Menu in the web browser to
view the memory module details.
1. Select W W & M → W.3 Memory Module Version.
The
Memory Module Info page appears.
2. Use the information on screen to see how many memory modules are in-
stalled, the ID of each module and to which CPB port(s) they are connect-
ed.
To view the memory
module details with local
service panel
This procedure describes how to use the Service Menu in the local service pan-
el to view the memory module details.
1. Press to move to the LAM VERSION W.1 menu.
2. Press , to move to MEM. MODULE INFO W.3 menu.
3. Press to move to the sub-menus and view the details for the memory
module(s).
To Next Page
Loading...
Need help?
General
