24 of 152 PSS5000/TEMA/803046/05
PSS 5000 – Technical Manual
3 Configuration and Service
1. Open the pop-up context menu in the frame of the page that you want to
print and select
Print Preview....
The
Print Preview window appears.
2. In the tool bar:
•Select
Only the selected frame in the 2nd drop-down menu
•Select
Shrink to Fit in the 3rd drop-down menu
• If necessary, use the orientation buttons to toggle between landscape
and portrait. Select the one that suits best.
3. Press Alt+P (or print symbol in tool bar).
The
Print window with your selected printer appears. If this is not the cor-
rect printer, use standard Windows procedures to select the correct printer.
4. Press Print.
The selected frame prints.
3.2 Software Changes
Description of software
changes
Changes to the Application Program and/or Legal Authority Module on the
PSS 5000 board take place by uploading the software using the Web Service
Menus (with a Java applet) or using an FTP connection. (FTP requires only a
few commands).
Note: Before attempting to upload an Application Program, please consult the
Software Release Document and check the requirements of the BOOT
program and LAM.
When a Legal Authority Module is uploaded, the Application Program and all
data is cleared. When a new program (APPL or BOOT) is started, the PSS
5000 automatically performs a reset. As the TCP/IP connection is lost during
a system reset, it is necessary to create a new connection in order to check the
result of the upload.
To Next Page
Loading...
Need help?
General
